kerms
/
wireless-proxy-esp32
0
0
Fork 0
Code

remove unused includes, files and reference

This commit is contained in:
kerms 2024-01-26 13:43:10 +08:00
parent 8e3b541d26
commit 24aa3bed7f
13 changed files with 91 additions and 2115 deletions

597
components/DAP/cmsis-dap/include/uart_modify.h
View File

@ -1,597 +0,0 @@
/**
* @brief Made some simple modifications to the official UART
*
*/
// Copyright 2018-2025 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _DRIVER_UART_H_
#define _DRIVER_UART_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "esp_err.h"
#include "esp_log.h"
#include "freertos/FreeRTOS.h"
#include "freertos/queue.h"
#include "freertos/semphr.h"
// SWO modify
extern volatile uint32_t kSWO_read_index;
extern volatile uint32_t kSWO_read_num;
extern volatile uint8_t kSWO_uart_notify_enable;
extern SemaphoreHandle_t kSWO_read_mux;
#define UART_FIFO_LEN (128) /*!< Length of the hardware FIFO buffers */
#define UART_INTR_MASK 0x1ff /*!< Mask of all UART interrupts */
#define UART_LINE_INV_MASK (0x3f << 19) /*!< TBD */
#define UART_INVERSE_DISABLE (0x0) /*!< Disable UART signal inverse*/
#define UART_INVERSE_RXD (BIT(19)) /*!< UART RXD input inverse*/
#define UART_INVERSE_CTS (BIT(20)) /*!< UART CTS input inverse*/
#define UART_INVERSE_TXD (BIT(22)) /*!< UART TXD output inverse*/
#define UART_INVERSE_RTS (BIT(23)) /*!< UART RTS output inverse*/
/**
* @brief UART mode selection
*/
typedef enum {
UART_MODE_UART = 0x00, /*!< mode: regular UART mode*/
} uart_mode_t;
/**
* @brief UART word length constants
*/
typedef enum {
UART_DATA_5_BITS = 0x0, /*!< word length: 5bits*/
UART_DATA_6_BITS = 0x1, /*!< word length: 6bits*/
UART_DATA_7_BITS = 0x2, /*!< word length: 7bits*/
UART_DATA_8_BITS = 0x3, /*!< word length: 8bits*/
UART_DATA_BITS_MAX = 0x4,
} uart_word_length_t;
/**
* @brief UART stop bits number
*/
typedef enum {
UART_STOP_BITS_1 = 0x1, /*!< stop bit: 1bit*/
UART_STOP_BITS_1_5 = 0x2, /*!< stop bit: 1.5bits*/
UART_STOP_BITS_2 = 0x3, /*!< stop bit: 2bits*/
UART_STOP_BITS_MAX = 0x4,
} uart_stop_bits_t;
/**
* @brief UART peripheral number
*/
typedef enum {
UART_NUM_0 = 0x0,
UART_NUM_1 = 0x1,
UART_NUM_MAX,
} uart_port_t;
/**
* @brief UART parity constants
*/
typedef enum {
UART_PARITY_DISABLE = 0x0, /*!< Disable UART parity*/
UART_PARITY_EVEN = 0x2, /*!< Enable UART even parity*/
UART_PARITY_ODD = 0x3 /*!< Enable UART odd parity*/
} uart_parity_t;
/**
* @brief UART hardware flow control modes
*/
typedef enum {
UART_HW_FLOWCTRL_DISABLE = 0x0, /*!< disable hardware flow control*/
UART_HW_FLOWCTRL_RTS = 0x1, /*!< enable RX hardware flow control (rts)*/
UART_HW_FLOWCTRL_CTS = 0x2, /*!< enable TX hardware flow control (cts)*/
UART_HW_FLOWCTRL_CTS_RTS = 0x3, /*!< enable hardware flow control*/
UART_HW_FLOWCTRL_MAX = 0x4,
} uart_hw_flowcontrol_t;
/**
* @brief UART configuration parameters for my_uart_param_config function
*/
typedef struct {
int baud_rate; /*!< UART baud rate*/
uart_word_length_t data_bits; /*!< UART byte size*/
uart_parity_t parity; /*!< UART parity mode*/
uart_stop_bits_t stop_bits; /*!< UART stop bits*/
uart_hw_flowcontrol_t flow_ctrl; /*!< UART HW flow control mode (cts/rts)*/
uint8_t rx_flow_ctrl_thresh; /*!< UART HW RTS threshold*/
} uart_config_t;
/**
* @brief UART interrupt configuration parameters for my_uart_intr_config function
*/
typedef struct {
uint32_t intr_enable_mask; /*!< UART interrupt enable mask, choose from UART_XXXX_INT_ENA_M under UART_INT_ENA_REG(i), connect with bit-or operator*/
uint8_t rx_timeout_thresh; /*!< UART timeout interrupt threshold (unit: time of sending one byte)*/
uint8_t txfifo_empty_intr_thresh; /*!< UART TX empty interrupt threshold.*/
uint8_t rxfifo_full_thresh; /*!< UART RX full interrupt threshold.*/
} uart_intr_config_t;
/**
* @brief UART event types used in the ring buffer
*/
typedef enum {
UART_DATA, /*!< UART data event*/
UART_BUFFER_FULL, /*!< UART RX buffer full event*/
UART_FIFO_OVF, /*!< UART FIFO overflow event*/
UART_FRAME_ERR, /*!< UART RX frame error event*/
UART_PARITY_ERR, /*!< UART RX parity event*/
UART_EVENT_MAX, /*!< UART event max index*/
} uart_event_type_t;
/**
* @brief Event structure used in UART event queue
*/
typedef struct {
uart_event_type_t type; /*!< UART event type */
size_t size; /*!< UART data size for UART_DATA event*/
} uart_event_t;
/**
* @brief Set UART data bits.
*
* @param uart_num Uart port number.
* @param data_bit Uart data bits.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_set_word_length(uart_port_t uart_num, uart_word_length_t data_bit);
/**
* @brief Get UART data bits.
*
* @param uart_num Uart port number.
* @param data_bit Pointer to accept value of UART data bits.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_get_word_length(uart_port_t uart_num, uart_word_length_t *data_bit);
/**
* @brief Set UART stop bits.
*
* @param uart_num Uart port number
* @param stop_bits Uart stop bits
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_set_stop_bits(uart_port_t uart_num, uart_stop_bits_t stop_bits);
/**
* @brief Get UART stop bits.
*
* @param uart_num Uart port number.
* @param stop_bits Pointer to accept value of UART stop bits.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_get_stop_bits(uart_port_t uart_num, uart_stop_bits_t *stop_bits);
/**
* @brief Set UART parity mode.
*
* @param uart_num Uart port number.
* @param parity_mode The enum of uart parity configuration.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_set_parity(uart_port_t uart_num, uart_parity_t parity_mode);
/**
* @brief Get UART parity mode.
*
* @param uart_num Uart port number
* @param parity_mode Pointer to accept value of UART parity mode.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_get_parity(uart_port_t uart_num, uart_parity_t *parity_mode);
/**
* @brief Set UART baud rate.
*
* @param uart_num Uart port number
* @param baudrate UART baud rate.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_set_baudrate(uart_port_t uart_num, uint32_t baudrate);
/**
* @brief Get UART baud rate.
*
* @param uart_num Uart port number.
* @param baudrate Pointer to accept value of Uart baud rate.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_get_baudrate(uart_port_t uart_num, uint32_t *baudrate);
/**
* @brief Set UART line inverse mode
*
* @param uart_num UART_NUM_0
* @param inverse_mask Choose the wires that need to be inverted.
* Inverse_mask should be chosen from
* UART_INVERSE_RXD / UART_INVERSE_TXD / UART_INVERSE_RTS / UART_INVERSE_CTS,
* combined with OR operation.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_set_line_inverse(uart_port_t uart_num, uint32_t inverse_mask);
/**
* @brief Configure Hardware flow control.
*
* @param uart_num Uart port number.
* @param flow_ctrl Hardware flow control mode.
* @param rx_thresh Threshold of Hardware flow control.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_set_hw_flow_ctrl(uart_port_t uart_num, uart_hw_flowcontrol_t flow_ctrl, uint8_t rx_thresh);
/**
* @brief Get hardware flow control mode
*
* @param uart_num Uart port number.
* @param flow_ctrl Option for different flow control mode.
*
* @return
* - ESP_OK Success, result will be put in (*flow_ctrl)
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_get_hw_flow_ctrl(uart_port_t uart_num, uart_hw_flowcontrol_t *flow_ctrl);
/**
* @brief UART0 swap.
* Use MTCK as UART0 RX, MTDO as UART0 TX, so ROM log will not output from
* this new UART0. We also need to use MTDO (U0RTS) and MTCK (U0CTS) as UART0 in hardware.
*
* @return
* - ESP_OK Success
*/
esp_err_t my_uart_enable_swap(void);
/**
* @brief Disable UART0 swap.
* Use the original UART0, not MTCK and MTDO.
*
* @return
* - ESP_OK Success
*/
esp_err_t my_uart_disable_swap(void);
/**
* @brief Clear uart interrupts status.
*
* @param uart_num Uart port number.
* @param mask Uart interrupt bits mask.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_clear_intr_status(uart_port_t uart_num, uint32_t mask);
/**
* @brief Set UART interrupt enable
*
* @param uart_num Uart port number
* @param enable_mask Bit mask of the enable bits.
* The bit mask should be composed from the fields of register UART_INT_ENA_REG.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_enable_intr_mask(uart_port_t uart_num, uint32_t enable_mask);
/**
* @brief Clear UART interrupt enable bits
*
* @param uart_num Uart port number
* @param disable_mask Bit mask of the disable bits.
* The bit mask should be composed from the fields of register UART_INT_ENA_REG.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_disable_intr_mask(uart_port_t uart_num, uint32_t disable_mask);
/**
* @brief Enable UART RX interrupt (RX_FULL & RX_TIMEOUT INTERRUPT)
*
* @param uart_num UART_NUM_0
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_enable_rx_intr(uart_port_t uart_num);
/**
* @brief Disable UART RX interrupt (RX_FULL & RX_TIMEOUT INTERRUPT)
*
* @param uart_num UART_NUM_0
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_disable_rx_intr(uart_port_t uart_num);
/**
* @brief Disable UART TX interrupt (TX_FULL & TX_TIMEOUT INTERRUPT)
*
* @param uart_num UART_NUM_0
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_disable_tx_intr(uart_port_t uart_num);
/**
* @brief Enable UART TX interrupt (TX_FULL & TX_TIMEOUT INTERRUPT)
*
* @param uart_num UART_NUM_0
* @param enable 1: enable; 0: disable
* @param thresh Threshold of TX interrupt, 0 ~ UART_FIFO_LEN
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_enable_tx_intr(uart_port_t uart_num, int enable, int thresh);
/**
* @brief Register UART interrupt handler (ISR).
*
* @param uart_num UART_NUM_0
* @param fn Interrupt handler function.
* @param arg parameter for handler function
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_isr_register(uart_port_t uart_num, void (*fn)(void *), void *arg);
/**
* @brief Config Common parameters of serial ports.
*
* @param uart_num Uart port number.
* @param uart_conf Uart config parameters.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_param_config(uart_port_t uart_num, uart_config_t *uart_conf);
/**
* @brief Config types of uarts.
*
* @param uart_num Uart port number.
* @param uart_intr_conf Uart interrupt config parameters.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_intr_config(uart_port_t uart_num, uart_intr_config_t *uart_intr_conf);
/**
* @brief Install UART driver.
*
* @note Rx_buffer_size should be greater than UART_FIFO_LEN. Tx_buffer_size should be either zero or greater than UART_FIFO_LEN.
*
* @param uart_num Uart port number.
* @param rx_buffer_size UART RX ring buffer size.
* @param tx_buffer_size UART TX ring buffer size.
* If set to zero, driver will not use TX buffer, TX function will block task until all data have been sent out.
* @param queue_size UART event queue size/depth.
* @param uart_queue UART event queue handle (out param). On success, a new queue handle is written here to provide
* access to UART events. If set to NULL, driver will not use an event queue.
* @param no_use Invalid parameters, just to fit some modules.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_driver_install(uart_port_t uart_num, int rx_buffer_size, int tx_buffer_size, int queue_size, QueueHandle_t *uart_queue, int no_use);
/**
* @brief Uninstall UART driver.
*
* @param uart_num Uart port number.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_driver_delete(uart_port_t uart_num);
/**
* @brief Waiting for the last byte of data to be sent
*
* @param uart_num Uart port number.
* @param ticks_to_wait Timeout, count in RTOS ticks
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_wait_tx_done(uart_port_t uart_num, TickType_t ticks_to_wait);
/**
* @brief Send data to the UART port from a given buffer and length.
*
* This function will not wait for enough space in TX FIFO. It will just fill the available TX FIFO and return when the FIFO is full.
* @note This function should only be used when UART TX buffer is not enabled.
*
* @param uart_num Uart port number.
* @param buffer data buffer address
* @param len data length to send
*
* @return
* - (-1) Parameter error
* - OTHERS (>=0) The number of bytes pushed to the TX FIFO
*/
int my_uart_tx_chars(uart_port_t uart_num, const char *buffer, uint32_t len);
/**
* @brief Send data to the UART port from a given buffer and length,
*
* If the UART driver's parameter 'tx_buffer_size' is set to zero:
* This function will not return until all the data have been sent out, or at least pushed into TX FIFO.
*
* Otherwise, if the 'tx_buffer_size' > 0, this function will return after copying all the data to tx ring buffer,
* UART ISR will then move data from the ring buffer to TX FIFO gradually.
*
* @param uart_num Uart port number.
* @param src data buffer address
* @param size data length to send
*
* @return
* - (-1) Parameter error
* - OTHERS (>=0) The number of bytes pushed to the TX FIFO
*/
int my_uart_write_bytes(uart_port_t uart_num, const char *src, size_t size);
/**
* @brief UART read bytes from UART buffer
*
* @param uart_num Uart port number.
* @param buf pointer to the buffer.
* @param length data length
* @param ticks_to_wait sTimeout, count in RTOS ticks
*
* @return
* - (-1) Error
* - OTHERS (>=0) The number of bytes read from UART FIFO
*/
int my_uart_read_bytes(uart_port_t uart_num, uint8_t *buf, uint32_t length, TickType_t ticks_to_wait);
/**
* @brief Alias of my_uart_flush_input.
* UART ring buffer flush. This will discard all data in the UART RX buffer.
* @note Instead of waiting the data sent out, this function will clear UART rx buffer.
* In order to send all the data in tx FIFO, we can use my_uart_wait_tx_done function.
* @param uart_num UART port number.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_flush(uart_port_t uart_num);
/**
* @brief Clear input buffer, discard all the data is in the ring-buffer.
* @note In order to send all the data in tx FIFO, we can use my_uart_wait_tx_done function.
* @param uart_num UART port number.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_flush_input(uart_port_t uart_num);
/**
* @brief UART get RX ring buffer cached data length
*
* @param uart_num UART port number.
* @param size Pointer of size_t to accept cached data length
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_get_buffered_data_len(uart_port_t uart_num, size_t *size);
/**
* @brief UART set threshold timeout for TOUT feature
*
* @param uart_num Uart number to configure
* @param tout_thresh This parameter defines timeout threshold in uart symbol periods. The maximum value of threshold is 126.
* tout_thresh = 1, defines TOUT interrupt timeout equal to transmission time of one symbol (~11 bit) on current baudrate.
* If the time is expired the UART_RXFIFO_TOUT_INT interrupt is triggered. If tout_thresh == 0,
* the TOUT feature is disabled.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t my_uart_set_rx_timeout(uart_port_t uart_num, const uint8_t tout_thresh);
/**
* @brief Asynchronously read bytes to swo buffer
* @note This function only serves as a notification,
* and will initiate a callback when the buffer reaches the length since we modify the uart
* @param index buffer index to read
* @param length data length
* @return esp_err_t
* - ESP_OK Success
* - ESP_FAIL There are still unfinished requests
*/
esp_err_t my_uart_read_bytes_async_swo(uint32_t index, uint32_t length);
/**
* @brief UART get RX ring buffer cached data length
* @note This function is basically equivalent to \ref my_uart_get_buffered_data_len
* @param uart_num UART port number.
*
* @return data length
*/
int my_uart_get_rx_buffered_data_len(uart_port_t uart_num);
#ifdef __cplusplus
}
#endif
#endif // _DRIVER_UART_H_

1
components/DAP/cmsis-dap/source/DAP_vendor.c
View File

@ -25,7 +25,6 @@
*
*---------------------------------------------------------------------------*/
#include "DAP_config.h"
#include "cmsis-dap/include/DAP.h"
//**************************************************************************************************

19
components/DAP/cmsis-dap/source/SWO.c
View File

@ -1,16 +1,3 @@
/**
* @file SWO.c
* @author windowsair
* @brief SWO support
* @change: 2021-02-17: Add basic functions
* @version 0.2
*
* @date 2021-02-17
*
* @copyright Copyright (c) 2021
*
*/
/*
* Copyright (c) 2013-2017 ARM Limited. All rights reserved.
*
@ -39,14 +26,8 @@
*---------------------------------------------------------------------------*/
#include "DAP_config.h"
#include "cmsis-dap/include/DAP.h"
#include "cmsis-dap/include/uart_modify.h"
#include "cmsis-dap/include/swo.h"
#include "esp_err.h"
EventGroupHandle_t kSwoThreadEventGroup;

1335
components/DAP/cmsis-dap/source/uart_modify.c
View File

File diff suppressed because it is too large Load Diff

1
components/USBIP/usb_descriptor.c
View File

@ -10,7 +10,6 @@
*
*/
#include <stdint.h>
#include <stdbool.h>
#include "components/USBIP/usb_descriptor.h"
#include "components/USBIP/usb_defs.h"

113
components/USBIP/usb_handle.c
View File

@ -11,16 +11,11 @@
#include <string.h>
#include "usbip_server.h"
#include "main/wifi_configuration.h"
#include "components/USBIP/usb_handle.h"
#include "components/USBIP/usb_descriptor.h"
#include "components/USBIP/MSOS20_descriptor.h"
#include "lwip/err.h"
#include "lwip/sockets.h"
#include "lwip/sys.h"
#include <lwip/netdb.h>
const char *strings_list[] = {
@ -43,28 +38,28 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.bRequest)
{
case USB_REQ_CLEAR_FEATURE:
os_printf("* CLEAR FEATURE\r\n");
printf("* CLEAR FEATURE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_FEATURE:
os_printf("* SET FEATURE\r\n");
printf("* SET FEATURE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_ADDRESS:
os_printf("* SET ADDRESS\r\n");
printf("* SET ADDRESS\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_DESCRIPTOR:
os_printf("* SET DESCRIPTOR\r\n");
printf("* SET DESCRIPTOR\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_CONFIGURATION:
os_printf("* SET CONFIGURATION\r\n");
printf("* SET CONFIGURATION\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
break;
@ -72,21 +67,21 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.bRequest)
{
case USB_REQ_CLEAR_FEATURE:
os_printf("* CLEAR FEATURE\r\n");
printf("* CLEAR FEATURE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_FEATURE:
os_printf("* SET FEATURE\r\n");
printf("* SET FEATURE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_INTERFACE:
os_printf("* SET INTERFACE\r\n");
printf("* SET INTERFACE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
break;
@ -94,17 +89,17 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.bRequest)
{
case USB_REQ_CLEAR_FEATURE:
os_printf("* CLEAR FEATURE\r\n");
printf("* CLEAR FEATURE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_FEATURE:
os_printf("* SET INTERFACE\r\n");
printf("* SET INTERFACE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
break;
@ -117,19 +112,19 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.bRequest)
{
case USB_REQ_GET_CONFIGURATION:
os_printf("* GET CONIFGTRATION\r\n");
printf("* GET CONIFGTRATION\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_GET_DESCRIPTOR:
handleGetDescriptor(header); ////TODO: device_qualifier
break;
case USB_REQ_GET_STATUS:
os_printf("* GET STATUS\r\n");
printf("* GET STATUS\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
break;
@ -139,21 +134,21 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.bRequest)
{
case USB_REQ_GET_INTERFACE:
os_printf("* GET INTERFACE\r\n");
printf("* GET INTERFACE\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_SET_SYNCH_FRAME:
os_printf("* SET SYNCH FRAME\r\n");
printf("* SET SYNCH FRAME\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
case USB_REQ_GET_STATUS:
os_printf("* GET STATUS\r\n");
printf("* GET STATUS\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
break;
@ -162,13 +157,13 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.bRequest)
{
case USB_REQ_GET_STATUS:
os_printf("* GET STATUS\r\n");
printf("* GET STATUS\r\n");
send_stage2_submit_data(header, 0, 0, 0);
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
break;
@ -178,18 +173,18 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (wIndex)
{
case MS_OS_20_DESCRIPTOR_INDEX:
os_printf("* GET MSOS 2.0 vendor-specific descriptor\r\n");
printf("* GET MSOS 2.0 vendor-specific descriptor\r\n");
send_stage2_submit_data(header, 0, msOs20DescriptorSetHeader, sizeof(msOs20DescriptorSetHeader));
break;
case MS_OS_20_SET_ALT_ENUMERATION:
// set alternate enumeration command
// bAltEnumCode set to 0
os_printf("Set alternate enumeration.This should not happen.\r\n");
printf("Set alternate enumeration.This should not happen.\r\n");
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d,wIndex:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest, wIndex);
printf("USB unknown request, bmRequestType:%d,bRequest:%d,wIndex:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest, wIndex);
break;
}
break;
@ -198,19 +193,19 @@ void handleUSBControlRequest(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.bRequest)
{
case USB_REQ_SET_IDLE:
os_printf("* SET IDLE\r\n");
printf("* SET IDLE\r\n");
send_stage2_submit(header, 0, 0);
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
break;
default:
os_printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
printf("USB unknown request, bmRequestType:%d,bRequest:%d\r\n",
header->u.cmd_submit.request.bmRequestType, header->u.cmd_submit.request.bRequest);
break;
}
}
@ -221,23 +216,23 @@ static void handleGetDescriptor(usbip_stage2_header *header)
switch (header->u.cmd_submit.request.wValue.u8hi)
{
case USB_DT_DEVICE: // get device descriptor
os_printf("* GET 0x01 DEVICE DESCRIPTOR\r\n");
printf("* GET 0x01 DEVICE DESCRIPTOR\r\n");
send_stage2_submit_data(header, 0, &kUSBd0DeviceDescriptor[0], sizeof(kUSBd0DeviceDescriptor));
break;
case USB_DT_CONFIGURATION: // get configuration descriptor
os_printf("* GET 0x02 CONFIGURATION DESCRIPTOR\r\n");
printf("* GET 0x02 CONFIGURATION DESCRIPTOR\r\n");
////TODO: ?
if (header->u.cmd_submit.data_length == USB_DT_CONFIGURATION_SIZE)
{
os_printf("Sending only first part of CONFIG\r\n");
printf("Sending only first part of CONFIG\r\n");
send_stage2_submit(header, 0, header->u.cmd_submit.data_length);
usbip_network_send(kSock, kUSBd0ConfigDescriptor, sizeof(kUSBd0ConfigDescriptor), 0);
}
else
{
os_printf("Sending ALL CONFIG\r\n");
printf("Sending ALL CONFIG\r\n");
send_stage2_submit(header, 0, sizeof(kUSBd0ConfigDescriptor) + sizeof(kUSBd0InterfaceDescriptor));
usbip_network_send(kSock, kUSBd0ConfigDescriptor, sizeof(kUSBd0ConfigDescriptor), 0);
usbip_network_send(kSock, kUSBd0InterfaceDescriptor, sizeof(kUSBd0InterfaceDescriptor), 0);
@ -249,7 +244,7 @@ static void handleGetDescriptor(usbip_stage2_header *header)
if (header->u.cmd_submit.request.wValue.u8lo == 0)
{
os_printf("** REQUESTED list of supported languages\r\n");
printf("** REQUESTED list of supported languages\r\n");
send_stage2_submit_data(header, 0, kLangDescriptor, sizeof(kLangDescriptor));
}
else if (header->u.cmd_submit.request.wValue.u8lo != 0xee)
@ -272,27 +267,27 @@ static void handleGetDescriptor(usbip_stage2_header *header)
}
else
{
os_printf("low bit : %d\r\n", (int)header->u.cmd_submit.request.wValue.u8lo);
os_printf("high bit : %d\r\n", (int)header->u.cmd_submit.request.wValue.u8hi);
os_printf("***Unsupported String descriptor***\r\n");
printf("low bit : %d\r\n", (int) header->u.cmd_submit.request.wValue.u8lo);
printf("high bit : %d\r\n", (int) header->u.cmd_submit.request.wValue.u8hi);
printf("***Unsupported String descriptor***\r\n");
send_stage2_submit(header, 0, 0);
}
break;
case USB_DT_INTERFACE:
os_printf("* GET 0x04 INTERFACE DESCRIPTOR (UNIMPLEMENTED)\r\n");
printf("* GET 0x04 INTERFACE DESCRIPTOR (UNIMPLEMENTED)\r\n");
////TODO:UNIMPLEMENTED
send_stage2_submit(header, 0, 0);
break;
case USB_DT_ENDPOINT:
os_printf("* GET 0x05 ENDPOINT DESCRIPTOR (UNIMPLEMENTED)\r\n");
printf("* GET 0x05 ENDPOINT DESCRIPTOR (UNIMPLEMENTED)\r\n");
////TODO:UNIMPLEMENTED
send_stage2_submit(header, 0, 0);
break;
case USB_DT_DEVICE_QUALIFIER:
os_printf("* GET 0x06 DEVICE QUALIFIER DESCRIPTOR\r\n");
printf("* GET 0x06 DEVICE QUALIFIER DESCRIPTOR\r\n");
usb_device_qualifier_descriptor desc;
@ -302,19 +297,19 @@ static void handleGetDescriptor(usbip_stage2_header *header)
break;
case USB_DT_OTHER_SPEED_CONFIGURATION:
os_printf("GET 0x07 [UNIMPLEMENTED] USB_DT_OTHER_SPEED_CONFIGURATION\r\n");
printf("GET 0x07 [UNIMPLEMENTED] USB_DT_OTHER_SPEED_CONFIGURATION\r\n");
////TODO:UNIMPLEMENTED
send_stage2_submit(header, 0, 0);
break;
case USB_DT_INTERFACE_POWER:
os_printf("GET 0x08 [UNIMPLEMENTED] USB_DT_INTERFACE_POWER\r\n");
printf("GET 0x08 [UNIMPLEMENTED] USB_DT_INTERFACE_POWER\r\n");
////TODO:UNIMPLEMENTED
send_stage2_submit(header, 0, 0);
break;
#if (USE_WINUSB == 1)
case USB_DT_BOS:
os_printf("* GET 0x0F BOS DESCRIPTOR\r\n");
printf("* GET 0x0F BOS DESCRIPTOR\r\n");
uint32_t bos_len = header->u.cmd_submit.request.wLength.u8lo | ((uint32_t) header->u.cmd_submit.request.wLength.u8hi << 8);
bos_len = (sizeof(bosDescriptor) < bos_len) ? sizeof(bosDescriptor) : bos_len;
send_stage2_submit_data(header, 0, bosDescriptor, bos_len);
@ -327,9 +322,9 @@ static void handleGetDescriptor(usbip_stage2_header *header)
#endif
default:
//// TODO: ms os 1.0 descriptor
os_printf("USB unknown Get Descriptor requested:%d\r\n", header->u.cmd_submit.request.wValue.u8lo);
os_printf("low bit :%d\r\n",header->u.cmd_submit.request.wValue.u8lo);
os_printf("high bit :%d\r\n",header->u.cmd_submit.request.wValue.u8hi);
printf("USB unknown Get Descriptor requested:%d\r\n", header->u.cmd_submit.request.wValue.u8lo);
printf("low bit :%d\r\n", header->u.cmd_submit.request.wValue.u8lo);
printf("high bit :%d\r\n", header->u.cmd_submit.request.wValue.u8hi);
break;
}
}

26
components/dap_proxy/DAP_handle.c
View File

@ -17,11 +17,7 @@
#include "usbip_server.h"
#include "DAP_handle.h"
#include "main/dap_configuration.h"
#include "main/wifi_configuration.h"
#include "components/USBIP/usb_descriptor.h"
#include "cmsis-dap/include/DAP.h"
#include "cmsis-dap/include/swo.h"
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
@ -30,14 +26,8 @@
#include "lwip/err.h"
#include "lwip/sockets.h"
#include "lwip/sys.h"
#include <lwip/netdb.h>
#if ((USE_MDNS == 1) || (USE_OTA == 1))
#define DAP_BUFFER_NUM 10
#else
#define DAP_BUFFER_NUM 20
#endif
#define DAP_BUFFER_NUM 10
#if (USE_WINUSB == 1)
typedef struct
@ -55,9 +45,6 @@ typedef struct
#define DAP_HANDLE_SIZE (sizeof(DapPacket_t))
extern int kSock;
extern TaskHandle_t kDAPTaskHandle;
int kRestartDAPHandle = NO_SIGNAL;
@ -116,13 +103,11 @@ void handle_dap_data_request(usbip_stage2_header *header, uint32_t length)
// always send constant size buf -> cuz we don't care about the IN packet size
// and to unify the style, we set aside the length of the section
xRingbufferSend(dap_dataIN_handle, data_in - sizeof(uint32_t), DAP_HANDLE_SIZE, portMAX_DELAY);
xTaskNotifyGive(kDAPTaskHandle);
#else
send_stage2_submit(header, 0, 0);
xRingbufferSend(dap_dataIN_handle, data_in, DAP_HANDLE_SIZE, portMAX_DELAY);
xTaskNotifyGive(kDAPTaskHandle);
#endif
@ -188,7 +173,7 @@ void DAP_Thread(void *argument)
if (dap_dataIN_handle == NULL || dap_dataIN_handle == NULL ||
data_response_mux == NULL)
{
os_printf("Can not create DAP ringbuf/mux!\r\n");
printf("Can not create DAP ringbuf/mux!\r\n");
vTaskDelete(NULL);
}
for (;;)
@ -204,7 +189,7 @@ void DAP_Thread(void *argument)
malloc_dap_ringbuf();
if (dap_dataIN_handle == NULL || dap_dataIN_handle == NULL)
{
os_printf("Can not create DAP ringbuf/mux!\r\n");
printf("Can not create DAP ringbuf/mux!\r\n");
vTaskDelete(NULL);
}
}
@ -230,7 +215,8 @@ void DAP_Thread(void *argument)
else if (packetSize < DAP_HANDLE_SIZE)
{
os_printf("Wrong data in packet size:%d , data in remain: %d\r\n", packetSize, (int)xRingbufferGetMaxItemSize(dap_dataIN_handle));
printf("Wrong data in packet size:%d , data in remain: %d\r\n", packetSize,
(int) xRingbufferGetMaxItemSize(dap_dataIN_handle));
vRingbufferReturnItem(dap_dataIN_handle, (void *)item);
break;
// This may not happen because there is a semaphore acquisition
@ -294,7 +280,7 @@ int fast_reply(uint8_t *buf, uint32_t length)
}
else if (packetSize > 0)
{
os_printf("Wrong data out packet size:%d!\r\n", packetSize);
printf("Wrong data out packet size:%d!\r\n", packetSize);
}
////TODO: fast reply
}

28
components/dap_proxy/tcp_server.c
View File

@ -17,12 +17,10 @@
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_groups.h"
#include "lwip/err.h"
#include "lwip/sockets.h"
extern TaskHandle_t kDAPTaskHandle;
extern int kRestartDAPHandle;
uint8_t kState = ACCEPTING;
@ -60,10 +58,10 @@ void tcp_server_task(void *pvParameters)
int listen_sock = socket(addr_family, SOCK_STREAM, ip_protocol);
if (listen_sock < 0)
{
os_printf("Unable to create socket: errno %d\r\n", errno);
printf("Unable to create socket: errno %d\r\n", errno);
break;
}
os_printf("Socket created\r\n");
printf("Socket created\r\n");
setsockopt(listen_sock, SOL_SOCKET, SO_KEEPALIVE, (void *)&on, sizeof(on));
setsockopt(listen_sock, IPPROTO_TCP, TCP_NODELAY, (void *)&on, sizeof(on));
@ -71,18 +69,18 @@ void tcp_server_task(void *pvParameters)
int err = bind(listen_sock, (struct sockaddr *)&destAddr, sizeof(destAddr));
if (err != 0)
{
os_printf("Socket unable to bind: errno %d\r\n", errno);
printf("Socket unable to bind: errno %d\r\n", errno);
break;
}
os_printf("Socket binded\r\n");
printf("Socket binded\r\n");
err = listen(listen_sock, 1);
if (err != 0)
{
os_printf("Error occured during listen: errno %d\r\n", errno);
printf("Error occured during listen: errno %d\r\n", errno);
break;
}
os_printf("Socket listening\r\n");
printf("Socket listening\r\n");
#ifdef CONFIG_EXAMPLE_IPV6
struct sockaddr_in6 sourceAddr; // Large enough for both IPv4 or IPv6
@ -95,12 +93,12 @@ void tcp_server_task(void *pvParameters)
kSock = accept(listen_sock, (struct sockaddr *)&sourceAddr, &addrLen);
if (kSock < 0)
{
os_printf("Unable to accept connection: errno %d\r\n", errno);
printf("Unable to accept connection: errno %d\r\n", errno);
break;
}
setsockopt(kSock, SOL_SOCKET, SO_KEEPALIVE, (void *)&on, sizeof(on));
setsockopt(kSock, IPPROTO_TCP, TCP_NODELAY, (void *)&on, sizeof(on));
os_printf("Socket accepted\r\n");
printf("Socket accepted\r\n");
while (1)
{
@ -108,13 +106,13 @@ void tcp_server_task(void *pvParameters)
// Error occured during receiving
if (len < 0)
{
os_printf("recv failed: errno %d\r\n", errno);
printf("recv failed: errno %d\r\n", errno);
break;
}
// Connection closed
else if (len == 0)
{
os_printf("Connection closed\r\n");
printf("Connection closed\r\n");
break;
}
// Data received
@ -159,14 +157,14 @@ void tcp_server_task(void *pvParameters)
el_dap_data_process(tcp_rx_buffer, len);
break;
default:
os_printf("unkonw kstate!\r\n");
printf("unkonw kstate!\r\n");
}
}
}
// kState = ACCEPTING;
if (kSock != -1)
{
os_printf("Shutting down socket and restarting...\r\n");
printf("Shutting down socket and restarting...\r\n");
//shutdown(kSock, 0);
close(kSock);
if (kState == EMULATING || kState == EL_DATA_PHASE)
@ -176,8 +174,6 @@ void tcp_server_task(void *pvParameters)
el_process_buffer_free();
kRestartDAPHandle = RESET_HANDLE;
if (kDAPTaskHandle)
xTaskNotifyGive(kDAPTaskHandle);
//shutdown(listen_sock, 0);
//close(listen_sock);

31
components/dap_proxy/usbip_server.c
View File

@ -3,15 +3,12 @@
#include "usbip_server.h"
#include "DAP_handle.h"
#include "main/wifi_configuration.h"
#include "components/USBIP/usb_handle.h"
#include "components/USBIP/usb_descriptor.h"
#include "lwip/err.h"
#include "lwip/sockets.h"
#include "lwip/sys.h"
#include <lwip/netdb.h>
// attach helper function
@ -56,7 +53,7 @@ int attach(uint8_t *buffer, uint32_t length)
break;
default:
os_printf("attach Unknown command: %d\r\n", command);
printf("attach Unknown command: %d\r\n", command);
break;
}
return 0;
@ -74,19 +71,19 @@ static int read_stage1_command(uint8_t *buffer, uint32_t length)
static void handle_device_list(uint8_t *buffer, uint32_t length)
{
os_printf("Handling dev list request...\r\n");
printf("Handling dev list request...\r\n");
send_stage1_header(USBIP_STAGE1_CMD_DEVICE_LIST, 0);
send_device_list();
}
static void handle_device_attach(uint8_t *buffer, uint32_t length)
{
os_printf("Handling dev attach request...\r\n");
printf("Handling dev attach request...\r\n");
//char bus[USBIP_BUSID_SIZE];
if (length < sizeof(USBIP_BUSID_SIZE))
{
os_printf("handle device attach failed!\r\n");
printf("handle device attach failed!\r\n");
return;
}
//client.readBytes((uint8_t *)bus, USBIP_BUSID_SIZE);
@ -100,7 +97,7 @@ static void handle_device_attach(uint8_t *buffer, uint32_t length)
static void send_stage1_header(uint16_t command, uint32_t status)
{
os_printf("Sending header...\r\n");
printf("Sending header...\r\n");
usbip_stage1_header header;
header.version = htons(273); ////TODO: 273???
// may be : https://github.com/Oxalin/usbip_windows/issues/4
@ -113,10 +110,10 @@ static void send_stage1_header(uint16_t command, uint32_t status)
static void send_device_list()
{
os_printf("Sending device list...\r\n");
printf("Sending device list...\r\n");
// send device list size:
os_printf("Sending device list size...\r\n");
printf("Sending device list size...\r\n");
usbip_stage1_response_devlist response_devlist;
// we have only 1 device, so:
@ -136,7 +133,7 @@ static void send_device_list()
static void send_device_info()
{
os_printf("Sending device info...\r\n");
printf("Sending device info...\r\n");
usbip_stage1_usb_device device;
strcpy(device.path, "/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1");
@ -163,7 +160,7 @@ static void send_device_info()
static void send_interface_info()
{
os_printf("Sending interface info...\r\n");
printf("Sending interface info...\r\n");
usbip_stage1_usb_interface interface;
interface.bInterfaceClass = USBD_CUSTOM_CLASS0_IF0_CLASS;
interface.bInterfaceSubClass = USBD_CUSTOM_CLASS0_IF0_SUBCLASS;
@ -207,7 +204,7 @@ int emulate(uint8_t *buffer, uint32_t length)
break;
default:
os_printf("emulate unknown command:%d\r\n", command);
printf("emulate unknown command:%d\r\n", command);
//handle_submit((usbip_stage2_header *)buffer, length);
return -1;
}
@ -317,16 +314,16 @@ static int handle_submit(usbip_stage2_header *header, uint32_t length)
case 0x81:
if (header->base.direction == 0)
{
os_printf("*** WARN! EP 81 DATA TX");
printf("*** WARN! EP 81 DATA TX");
}
else
{
os_printf("*** WARN! EP 81 DATA RX");
printf("*** WARN! EP 81 DATA RX");
}
return -1;
default:
os_printf("*** WARN ! UNKNOWN ENDPOINT: %d\r\n", (int)header->base.ep);
printf("*** WARN ! UNKNOWN ENDPOINT: %d\r\n", (int) header->base.ep);
return -1;
}
return 0;
@ -377,7 +374,7 @@ void send_stage2_submit_data_fast(usbip_stage2_header *req_header, const void *c
static void handle_unlink(usbip_stage2_header *header)
{
os_printf("s2 handling cmd unlink...\r\n");
printf("s2 handling cmd unlink...\r\n");
handle_dap_unlink();
send_stage2_unlink(header);
}

4
components/elaphureLink/elaphureLink_protocol.c
View File

@ -1,10 +1,6 @@
#include "components/elaphureLink/elaphureLink_protocol.h"
#include "lwip/err.h"
#include "lwip/sockets.h"
#include "lwip/sys.h"
#include <lwip/netdb.h>
extern int kSock;
extern int usbip_network_send(int s, const void *dataptr, size_t size, int flags);

22
main/main.c
View File

@ -1,14 +1,5 @@
/* BSD Socket API Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <string.h>
#include <stdint.h>
#include <sys/param.h>
#include "tcp_server.h"
#include "main/wifi_configuration.h"
@ -18,23 +9,12 @@
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_groups.h"
#include "esp_system.h"
#include "esp_wifi.h"
#include "esp_event.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "lwip/err.h"
#include "lwip/sockets.h"
#include "lwip/sys.h"
#include <lwip/netdb.h>
#include "mdns.h"
TaskHandle_t kDAPTaskHandle = NULL;
static const char *MDNS_TAG = "server_common";
void mdns_setup() {
@ -76,5 +56,5 @@ void app_main() {
xTaskCreate(tcp_server_task, "tcp_server", 4096, NULL, 14, NULL);
// DAP handle task
xTaskCreate(DAP_Thread, "DAP_Task", 2048, NULL, 10, &kDAPTaskHandle);
xTaskCreate(DAP_Thread, "DAP_Task", 2048, NULL, 10, NULL);
}

18
main/wifi_configuration.h
View File

@ -34,29 +34,11 @@ static struct {
#define DAP_IP_ADDRESS 192, 168, 137, 123
#define DAP_IP_GATEWAY 192, 168, 137, 1
#define DAP_IP_NETMASK 255, 255, 255, 0
//
#define USE_OTA 0
#define USE_UART_BRIDGE 0
#define UART_BRIDGE_PORT 1234
#define UART_BRIDGE_BAUDRATE 74880
//
// DO NOT CHANGE
#define USE_TCP_NETCONN 0
#define PORT 3240
#define CONFIG_EXAMPLE_IPV4 1
#define USE_KCP 0
#define MTU_SIZE 1500
//
extern int printf(const char *, ...);
inline int os_printf(const char *__restrict __fmt, ...) {
return printf(__fmt, __builtin_va_arg_pack());
}
#endif

11
main/wifi_handle.c
View File

@ -57,13 +57,13 @@ static void event_handler(void *handler_arg __attribute__((unused)),
ip_event_got_ip_t *event = event_data;
// GPIO_SET_LEVEL_HIGH(PIN_LED_WIFI_STATUS);
xEventGroupSetBits(wifi_event_group, IPV4_GOTIP_BIT);
os_printf("SYSTEM EVENT STA GOT IP : %s\r\n", ip4addr_ntoa((const ip4_addr_t *) &event->ip_info.ip));
printf("SYSTEM EVENT STA GOT IP : %s\r\n", ip4addr_ntoa((const ip4_addr_t *) &event->ip_info.ip));
break;
}
case WIFI_EVENT_STA_DISCONNECTED: {
wifi_event_sta_disconnected_t *event = event_data;
// GPIO_SET_LEVEL_LOW(PIN_LED_WIFI_STATUS);
os_printf("Disconnect reason : %d\r\n", event->reason);
printf("Disconnect reason : %d\r\n", event->reason);
#ifdef CONFIG_IDF_TARGET_ESP8266
if (info->disconnected.reason == WIFI_REASON_BASIC_RATE_NOT_SUPPORT) {
@ -78,9 +78,6 @@ static void event_handler(void *handler_arg __attribute__((unused)),
xEventGroupClearBits(wifi_event_group, IPV6_GOTIP_BIT);
#endif
#if (USE_UART_BRIDGE == 1)
uart_bridge_close();
#endif
break;
}
case IP_EVENT_GOT_IP6: {
@ -123,9 +120,9 @@ static void wait_for_ip() {
uint32_t bits = IPV4_GOTIP_BIT;
#endif
os_printf("Waiting for AP connection...\r\n");
printf("Waiting for AP connection...\r\n");
xEventGroupWaitBits(wifi_event_group, bits, false, true, portMAX_DELAY);
os_printf("Connected to AP\r\n");
printf("Connected to AP\r\n");
}
void wifi_init(void) {